Ferrule 42
Ferrule 42 is a tape stage: tape-machine saturation with head bump and low-frequency behaviour at 7.5, 15 and 30 IPS, a DRIVE control that keeps the output level while it deepens the colour, BIAS, LOW, AIR, two tape types, MIX and TRIM. Flutter and hiss are optional. A BLOOM stage is built in. Stereo, Summed S/C, Dual Mono and M/S, with a 14-day full trial and an offline licence.
The facts, in numbers
| Tape | Tape-machine saturation, head bump and low-frequency behaviour at 7.5, 15 and 30 IPS; two tape types |
|---|---|
| DRIVE | Keeps the output level while it deepens the colour; the DRIVE meter's zero is the soft-clip onset |
| Other controls | BIAS (it does not change the level), LOW (SOFT to TIGHT), AIR, MIX with the dry signal, TAPE IN, and a TRIM that is independent of TAPE IN |
| TAPE IN off | With TRIM at 0 dB, AIR at 0 and BLOOM Off the signal passes untouched at the plug-in's reported latency (the manual lists the one Dual Mono exception) |
| Flutter and hiss | Optional, in the options menu, default Off. Flutter On adds 4 ms of latency (192 samples at 48 kHz) |
| BLOOM | A built-in output-stage voice with the Satin and Iron engines, as on Ferrule 35 |
| Oversampling | Off / 2x / 4x / 8x, Minimum or Linear phase; default 2x Minimum |
| Presets | 34 factory presets: Init plus 33 starting points in eight categories |
| Stereo | Mono or stereo instance; Stereo, Summed S/C, Dual Mono, M/S |
| Displays | DRIVE meter, spectrum display with a transfer page; IN and OUT meters |
Every control on the strip
Ctrl / Cmd while dragging moves a control in exact steps of its displayed unit.
| Speed, TYPE | Three tape speeds (7.5, 15, 30 IPS) and two tape types. |
|---|---|
| DRIVE | How hard the tape is hit, with a meter whose zero is the soft-clip onset. Glides over about 80 ms. |
| BIAS, LOW, AIR | BIAS does not change the level; LOW runs from SOFT to TIGHT; AIR shapes the top. |
| MIX, TAPE IN, TRIM | MIX blends the dry signal in; TAPE IN takes the tape out; TRIM is independent of TAPE IN. |
| Options menu | Flutter and hiss (default Off), Bloom engine, oversampling. |
| General section | Displays, IN and OUT meters and trims, stereo-mode selector, power switch. UI size 75-200% |
14 days, every feature
The free trial is on the Ferrule 42 Gumroad page: the button below opens it; press Start the free 14-day trial there (price 0) for the Ferrule 42 installers for Windows and macOS. Install, insert Ferrule 42 in your host and press Start Free Trial inside the plug-in: 14 days, full features, full audio quality, no watermark. The clock starts when you press Start Free Trial, not when you download. Each Ferrule product has its own 14 days. When you buy, the same installation unlocks -- nothing to reinstall. Gumroad may ask for an email address to deliver the files.
We do not offer refunds on paid purchases -- the trial is how you decide. Your statutory rights are not affected. Refund policy
What is not perfect, plainly
We ship disclosure, not marketing. These are the known limits of Ferrule 42 1.0.0; the manual carries the full list, and the Ferrule FAQ answers the common questions.
- The level just after a preset load. In a test with steady tones (every factory preset loaded over Init and over its neighbours in the list, both directions; oversampling Off and the default) no load rose above the 1.0 dB line: the steps from Init to a starting point and to its neighbours in the list read at most 0.77 dB at 60 Hz (0.18 dB at 900 Hz and 8 kHz), and across all 1122 loads from one starting point to another none rose more than 0.77 dB above the louder of its two levels.
- The IN and OUT trims glide in dB over 50 ms, with no corner at either end: a move that is reversed halfway turns from where it is, and a move never passes its target. Moving IN and OUT in opposite directions at the same moment does not bump the level. In a test of single trim moves (60 Hz, 900 Hz and 8 kHz tones) the largest change of slope read at most 1.02 times the signal's own on every Ferrule product (the line is 1.10); a switch that changes the latency, made inside an IN move, adds no dip of its own.
- A switch that changes the latency (the oversampling mode or phase and, where this product has them, the Bloom engine, Flutter or Look) fades the output out over 5 ms, holds silence and fades it back in over 5 ms. For an oversampling change the whole mute lasts about 21 ms into minimum phase or Off and about 22 to 24 ms into linear phase at 44.1 and 48 kHz, about 18 and 19 ms at 96 kHz. If the IN trim was moved within the last 50 ms, the silence lasts until that move has finished (up to about 50 ms longer). In a test of such switches on every Ferrule product the largest sample-to-sample step on a 40 Hz tone read at most 1.086 times the signal's own (the line is 1.10). Content below 24 Hz inside the mute is not covered by that reading.
- The tape nonlinearity is static (memoryless): there is no hysteresis.
- DRIVE, LOW and BIAS glide over 80 ms (TRIM and AIR over 20 ms) so that automation steps do not click; the output follows a DRIVE step 63 to 79 ms late.
- MIX is a linear crossfade. At MIX 50 percent the tape's low-frequency phase puts a dip near 20 Hz.
- Flutter On adds 4 ms of latency, and while Iron is the selected BLOOM engine the reported latency grows by the Iron extra as well; both are reported together and your DAW compensates.
- Aliasing at the top of the DRIVE range: with DRIVE at 10, 44.1 kHz and the default 2x, a 19 kHz tone at -6 dBFS gives an alias at -36 dBc (48 kHz: -40 dBc); 4x and 8x read -63 and -83 dBc.
- The tape's distortion of the top octave grows with the oversampling setting: two tones at 19 and 20 kHz at -6 dBFS leave a 1 kHz difference tone at -77 dB with oversampling Off, -67 dB at 2x and -57 dB at 8x.
- Iron on top of the tape raises an alias line by 13.6 dB over the tape's own (manual section 8.4): a declared limit of this version.
- DRIVE automation costs about four times the static load (48 kHz, 2x: 2.6 percent of one core against 0.67 percent on the reference PC, DRIVE moving between 3 and 7 every 100 ms; manual section 10.5).
- A brief high-frequency dip can occur when the power switch or re-engaging crossfades at Minimum-phase oversampling; for this plug-in that figure was not read. Switching TAPE IN leaves a momentary dip at 20 kHz of -0.52 dB at 2x (-6.45 dB with oversampling Off).
- After the trial, the plug-in passes audio dry. That includes an offline bounce or export, so check the trial or licence status first if a render comes out unprocessed.
- A licence added while an instance is open is read the next time that instance loads. Reopen the session if another instance still shows the trial badge.
- Not every host on every platform has been tested. The main verification host is Studio One; Logic (macOS), Pro Tools (AAX) and the macOS builds are checked separately, and every figure on this page is a reading of the Windows build.
Formats & requirements
| Developer | GANUE Audio |
|---|---|
| Version | 1.0.0 |
| Windows | Windows 10 or later (64-bit): VST3, AAX |
| macOS | macOS 11.0 or later: VST3, AU, AAX (one Universal build, Apple Silicon and Intel; signed and notarized) |
| Standalone | None |
| Licence | Offline licence file, no iLok, no account, no online activation, no expiry |
| Trial | 14 days, full features |
| Price | USD 19 until Nov 30, 2026, then USD 29USD 29. Also in the Ferrule Modern Collection and the Ferrule Complete Collection |
| SHA-256, Windows installer | 741cc9824333cc4c8b5bae1f836fa563fff38a566f0c1931ba7d7f2e6980ade3 |
| SHA-256, macOS installer | 3c427a54c7a007f2bbc5f4adfcc1218f0dbac122c9cf4555359d83d69748fc77 |
Get Ferrule 42
USD 19 until Nov 30, 2026, then USD 29USD 29. Windows & macOS. 14-day full trial first.
Also in the Ferrule Modern Collection (Ferrule 51 (free) with 33, 35, 42 and 43): USD 49 until Nov 30, 2026, then USD 69USD 69; and in the Ferrule Complete Collection (all ten plug-ins): USD 89 until Nov 30, 2026, then USD 119USD 119.
Checkout is handled by Gumroad. Your licence file and the installer links arrive in a separate email from [email protected]; drag the file onto the Ferrule 42 window and it unlocks, offline. The PDF manual is included. EULA
By continuing to checkout you agree to the EULA and the Refund Policy.