Ferrule FAQ
The general questions (licence folders, SmartScreen, Gatekeeper, lost licence emails) are in the main FAQ.
What is Ferrule, and what does it cost?
Ferrule is a family of ten plug-ins in the 500-series format: five equalizers (51, 66, 73, 81, 84), a five-band parametric equalizer (33), two channel compressors (35, 43), a tape stage (42) and a free preamplifier (Pre). Ferrule Pre and Ferrule 51 are free. The other eight are USD 19 each until Nov 30, 2026, then USD 29. The Ferrule Modern Collection and the Ferrule Vintage Collection are USD 49 until Nov 30, 2026, then USD 69; the Ferrule Complete Collection, all ten, is USD 89 until Nov 30, 2026, then USD 119.
What is in the three collections?
Ferrule Complete Collection: all ten plug-ins (Ferrule Pre, 33, 35, 42, 43, 51, 66, 73, 81 and 84). Ferrule Modern Collection: Ferrule 51 with 33, 35, 42 and 43. Ferrule Vintage Collection: Ferrule Pre with 66, 73, 81 and 84. Ferrule Pre and Ferrule 51 are free on their own. Single paid plug-ins are USD 19 until Nov 30, 2026, then USD 29; the two five-plug-in collections USD 49, then USD 69; the Ferrule Complete Collection USD 89, then USD 119. One purchase gives you one licence file per paid plug-in in it (eight for the Ferrule Complete Collection, four for each of the other two) in a single email, plus the installer links.
How does the intro price work? Is there a code?
The intro price is applied automatically at checkout - no code needed: USD 19, USD 49 or USD 89 until Nov 30, 2026, and the list price (USD 29, USD 69, USD 119) from Dec 1.
Where do I download the installers?
On each plug-in's Gumroad page, linked from its product page: one file for Windows and one for macOS. On a paid plug-in's Gumroad page, press Start the free 14-day trial (price 0) for the same installers. Verify the file against the SHA-256 on the checksums page.
Is there a Mac version?
Yes. macOS 11.0 or later, Apple Silicon and Intel (one Universal package): VST3, AU and AAX, for all ten plug-ins. The package is signed and notarized.
Why does Windows warn when I run the installer?
The Windows installers are not yet Authenticode-signed. If SmartScreen appears, choose "More info", then "Run anyway". Verify the file against the SHA-256 on the checksums page. The AAX plug-ins inside are PACE-signed.
Do the Ferrule products share a trial or a licence?
No. Each paid product has its own 14-day trial, started by you inside that plug-in, and its own licence file. A collection order gives you one file per paid plug-in in it, in a single email. Ferrule Pre and Ferrule 51 need neither.
I already own one Ferrule product. What happens if I buy the collection?
The collection issues a separate licence file for every paid plug-in, so a plug-in you already own is issued again as an extra file you can keep using. Purchases are final (Refund policy).
I bought single plug-ins; do I get credit toward a collection?
There is no automatic upgrade credit. In the intro period the collections are the lower-cost way to take several plug-ins. If you need something specific, write to [email protected].
Why do some Ferrule plug-ins report latency and others report none?
Oversampling is what adds latency, and only plug-ins with a nonlinear stage open with it on. Ferrule 33 and 51 open at 4x (4 samples), Ferrule 35, 42 and 43 at 2x (3 samples), Ferrule Pre at 4x (6 to 8 samples). Ferrule 66, 73, 81 and 84 are linear equalizers and open with oversampling Off, which is 0 samples. The reported figure is a whole number of samples; your host compensates it.
Ferrule 35 reports a different latency when I choose Iron. Why?
While the Iron BLOOM engine is selected the plug-in reports the oversampling chain's latency plus a few samples (for example 14 instead of 3 at 2x Minimum), and switching the engine at 2x or 4x mutes briefly, the way changing the oversampling mode does. Your DAW compensates. With Satin selected the plug-in reports the lower figure; with Iron selected the extra stays even while BLOOM is Off.
The Q knob on Ferrule 33 does not read like a normal Q.
It is a measured scale of this plug-in: a given knob value gives a wider band than the textbook Q (a knob value of 1 behaves like a Q of about 0.4), and the band narrows as you raise the gain. The manual has the table.
Ferrule Pre has no OFF on GAIN. Why?
GAIN is continuous and has no OFF; at -20 the stage is driven by 0 dB (line level) and a line-level signal passes nearly linearly. The host's bypass is the only bit-exact state.
Does the level change when I turn GAIN on Ferrule Pre?
It is not meant to. An internal compensation predicts what the saturating stage takes and gives it back as the drive changes; the link adds a small trim. The exceptions (a large move down, a stereo pair with very different channel levels) are listed on the Ferrule Pre page.
Why does the level jump when I load a preset?
On our steady test tones (every factory preset loaded over Init and over its neighbours) no load rose more than 0.82 dB above the settled level on Ferrule 33 (0.82), 42 (0.77), 51 (0.71) and 43 (0.44), and 0.02 dB on Ferrule 66, 73, 81 and 84. A few Ferrule 35 presets still swell for a moment, mostly with oversampling Off: up to 1.65 dB for about 10 to 17 ms on programme material at 48 kHz (up to 2.56 dB on an 8 kHz test tone). Load presets with the track muted or the output turned down if that matters; the product pages and the manuals carry the details.
Are Ferrule Pre and Ferrule 51 really free?
Yes. No trial, no licence file, no activation, no account, no iLok. They are also part of the Ferrule Complete Collection (Ferrule Pre is also in the Ferrule Vintage Collection, Ferrule 51 in the Ferrule Modern Collection). Their terms are the End User License Agreement for free products.
Are the Ferrule plug-ins perfect?
No, and we say so. Each curve was measured and rebuilt from original code, and each product page and manual lists what is known not to be perfect. In plain words: the reported latency is a whole-sample figure that can differ from the true delay by about a sample, and after the trial the plug-in passes audio dry.